Clarion CMS4, Owner'S Manual & Installation Manual

Owner’s Manual

English

11

●

Dimmer Settings

These settings allow you to control the screen 

and button brightness based for DAY and 

NIGHT mode settings. 

Configure

 – Choose between DAY and NIGHT 

mode configuration 

Screen (HIGH)

 – This is the brightness level of 

the screen when dimmer is set to HIGH mode. 

Buttons (HIGH)

– This is the brightness level  

of the buttons when the dimmer is set to  

HIGH mode. 

Screen (LOW)

 – This is the brightness level of 

the screen when dimmer is set to LOW mode. 

Buttons (LOW) 

– This is the brightness level  

of the buttons when the dimmer is set to  

LOW mode.

●

Screen Saver

Press the 

[MENU]

 knob to toggle the screen 

saver mode: Clock/Slide Show/Off.
Screen saver will be enabled after 
[30/60/90/120] seconds of no device operation

●

LED Color

This unit is equipped with user configurable 

color LED. Once in the LED COLOR menu, 

rotate the 

[MENU]

 knob to select the LED 

Color. Press the 

[MENU]

 knob to complete the 

LED COLOR selection.

●

Beep

Press the 

[MENU]

 knob to select between  

ON and OFF.

●

Time

Press the 

[MENU]

 knob to enter clock setting 

mode. Use the 

[MENU]

 knob to set the clock, 

then press the

 [ 

 ]

 button to confirm.

●

Time Format

Press the 

[MENU]

 knob to choose a time 

format: 12H or 24H.

●

Camera Audio

Press the 

[MENU]

 knob to enter Camera Audio 

menu, rotate the 

[MENU]

 knob to select:

YES

 – The Aux audio is played while the 

Camera image is shown the display controller's 

screen. This will cause the Aux source to 

become unavailable as an audio playback 

source.

NO

 – The auxiliary audio input is not utilized 

while displaying the camera image on the 

display controller's screen.

●

Tuner Region

Press the 

[MENU]

 knob to enter the  

Tuner Region
menu, rotate the 

[MENU]

 knob to select the 

region: "EUROPE", "NORTH AMERICA", 

"ASIA" or “AUSTRALIA"

●

Audio Mode

Press the 

[MENU]

 knob to enter the Audio 

Mode screen, rotate the 

[MENU]

 knob to select 

Standard or Multi-Zone mode.

●

Remote Mode

ALL ZONES

– Selecting ALL ZONES will give 

wired remotes the ability to control the volume 

of all zones on the system.

INDVDL ZONE

– Selecting INDVDL ZONE will 

limit a wired remote to only controlling the zone 

that it is physically connected to.

●

Factory Reset

Select between SiriusXM or System restore 

then press the 

[MENU]

 knob to execute.

Settings