10
NZ503
English
English
Owner’
s Manual
English
Owner’
s Manual
[
]
Button
• Press to play/pause audio or video.
• Press to MUTE in Tuner mode.
• Press and hold to stop audio or video files.
[VOL+][VOL-]
Buttons
• Press to Increase and decrease volume.
[OPEN]
Button
• Press this button to open/close TFT panel.
• Press and hold to enter TFT panel angle setting
options.
[MENU/POWER]
button
• Press this key to power on the system in power off
mode.
• Keep pressing this key more than 2 second to turn
off the system when system is in power on mode.
• Press this button to display main menu, press again
to return current source when system is in power on
mode.
[BND/END PS]
Button
BND Function:
• Press this button to enter AM/FM tuner mode from
any source.
• Once in AM/FM tuner mode, you can press into
change bands among FM1, FM2, FM3,AM bands.
• Press and hold to start Preset Scan. Press again to
stop.
END Function:
Only be available when a call incoming or in telephone
talking.
• Press to reject call when a call incoming.
• press to end a call when in telephone talking.
[ISR/SEND]
Button
ISR Function:
When in tuner mode, press and hold this button for
3 seconds to save current station and band to ISR
memory, and at the same time, the tuner will enter
ISR mode with current station.
Note:
In ISR mode, the tuning operation is disabled. Press
this button again to quit ISR mode.
When in the other mode but not tuner mode, press
this key will go to ISR memory station directly, it likes a
shortcut. Press this key again to go back to previous
mode.
SEND Function:
Only be available when there is a coming call.
• Press this key to accept the coming call.
•Press to switch to private mode when in talking.
[IR] SENSOR
• Receiver for the remote control unit (operating range:
30 degree in all directions).
[microSD]
• Insert a microSD in this.
Note:
The microSD card is only for navigation. Please
don’t remove it, otherwise, the navigation function will
be disabled.
Summary of Contents for NZ503
Page 2: ...1 NZ503 1 English NX602 ...