929-0390-81
- M3 -
pin 77: MECHA SEL 1 : IN : The mechanism selection signal input.
pin 78: FL BOOT
: IN : Flash memory control.
pin 79: TEST 1
: IN : For the test.
pin 80: TEST 2
: IN : For the test.
pin 81: TEST 3
: IN : For the test.
pin 82: TEST 4
: IN : For the test.
pin 83: I2C REQUEST
: O : I2C request output.
pin 84: I2C SDA
:I/O: I2C serial data input/output.
pin 85: I2C SCL
:I/O: I2C serial clock input/output.
pin 86: ACC DET
: IN : ACC detection signal input.
pin 87: NU
: - : Not in use.
pin 88: SW 1
: IN : The switch signal input.
pin 89: VCC
: - : Positive voltage supply.
pin 90: SW 2
: IN : The switch signal input.
pin 91: VSS
: - : Negative voltage supply.
pin 92: SW 3
: IN : The switch signal input.
pin 93: SW 4
: IN : The switch signal input.
pin 94: NU
: - : Not in use.
pin 95: PT 3
: IN : The photo sensor signal input.
pin 96: PT 2
: IN : The photo sensor signal input.
pin 97: PT 1
: IN : The photo sensor signal input.
pin 98: PT 5
: IN : The photo sensor signal input.
pin 99: PT 4
: IN : The photo sensor signal input.
pin100: Vref H
: - : Reference voltage.