VRX630
37
English
Owner
’s manual
3. Operate the JOYSTICK
¡
rightward or left-
ward to select “ON” or “OFF” and press the ENT
at the center of the JOYSTICK
¡
to set it.
Note:
• If the P.EQ effect is set to OFF, the adjustment made
in “P.EQ operations” is not reflected in the music
source.
Calling P.EQ BASIC Pattern/USER
Pattern
1. Press the A-M button
&
to show the AUDIO-
MODE display.
2. Operate the JOYSTICK
¡
upward or down-
ward to select “P.EQ MODE”. “BASIC” and
“USER” items are displayed in the menu bar.
3. Operate the JOYSTICK
¡
rightward or left-
ward to select the item thus called, and press
the ENT at the center of the JOYSTICK
¡
to
show BASIC pattern selecting display or
USER pattern selection/memory display.
4. In the pattern selecting display, operate the
JOYSTICK
¡
rightward or leftward to select
P1 to P6, and press the ENT at the center of
the JOYSTICK
¡
to call corresponding P.EQ
pattern. In this display, pressing the No. but-
ton in correspondence to the Preset buttons
#
can also call the P.EQ pattern.
∗
After selecting P1 to P6 by operating the JOY-
STICK
¡
, press the ENT at the center of the
JOYSTICK
¡
for 2 seconds or longer to copy
the selected pattern to the USER pattern.
∗
Operate the JOYSTICK
¡
rightward or left-
ward to select “EDIT”, and press the ENT at
the center of the JOYSTICK
¡
to show P.EQ
adjusting display, in which the properties of
currently selected pattern can be adjusted.
∗
By pressing the BND button
%
in BASIC pat-
tern selecting display or USER pattern selec-
tion/memory display you can switch between
the two patterns, BASIC and USER.
5. Operate the JOYSTICK
¡
rightward or left-
ward to select “MENU”, and press the ENT at
the center of the JOYSTICK
¡
to return to
the AUDIO-MODE display.
Setting and storing P.EQ Proper-
ties/Memory into USER Pattern
1. In the Basic adjustment display or in the
User setting display, press the A-M button
&
to show the AUDIO-MODE display.
2. Operate the JOYSTICK
¡
upward or down-
ward to select “EDIT”, and press the ENT at
the center of the JOYSTICK
¡
to show the
P.EQ adjusting display.
3. Select an item to be adjusted by operating
the JOYSTICK
¡
rightward or leftward in the
P.EQ adjusting display.
4. Operate the JOYSTICK
¡
upward or down-
ward to set each adjusting value.
∗
By pressing the preset buttons
#
once in the
P.EQ adjusting display, the setting value for
currently stored USER pattern is obtained.
5. After making adjustments to a desired pat-
tern by repeating the operations of items 3
and 4, operate the JOYSTICK
¡
rightward
or leftward to move the cursor to “RTN”, and
press the ENT at the center of the JOY-
STICK
¡
to change over to the BASIC/
USER pattern selection/memory display.
6. Operate the JOYSTICK
¡
rightward or left-
ward in the BASIC/USER pattern selection/
memory display to select USER memory P1
to P6 to be stored, and press the ENT at the
center of the JOYSTICK
¡
for 2 seconds or
longer to store the adjusted P.EQ pattern to
the USER memory.
∗
By pressing the preset buttons
#
1 to 6 for 2
seconds or longer in the P.EQ adjusting dis-
play, the P.EQ pattern can be stored in the
USER memory.
7. To set a title of the stored USER pattern, op-
erate the JOYSTICK
¡
rightward or leftward
to select “TITLE” and press the ENT at the
center of the JOYSTICK
¡
to change into
the Title Input display.
∗
For title inputting method, refer to the section
“Entering titles”.
8. Operate the JOYSTICK
¡
rightward or left-
ward to select “MENU” and press the ENT at
the center of the JOYSTICK
¡
to change
into the AUDIO-MODE display.
DSP operations
