Clarion RMX855Dz, Owner'S Manual

16

RMX855Dz

Other Handy Functions

Setting the clock

1. Press and hold ADJ button 

4

 for 1 second or

longer to switch to the adjustment selection display.

2. Press the right or left side of SEARCH button

%

 to select “CLOCK”.

3. Press ENT button 

2

.

4. Press the right or left side of SEARCH button

%

 to select the hour or the minute.

5. Tur n the Rotar y knob 

&

 clockwise or

counterclockwise to set the correct time.

∗

 The clock is displayed in 12-hour format.

6. Press ENT button 

2

 to store the time into memory.

7. Press ADJ button 

4

 to return to the previous mode.

Note:
• You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.

Dimmer level setting

You can reduce the display illumination linked to
the car illumination.

∗

The factory default setting is “LEVEL 3”.

1. Press and hold ADJ button 

4

 for 1 second or

longer to switch to the adjustment selection display.

2. Press the right or left side of SEARCH button

%

 to select “DIMMER LV”.

3. Press ENT button 

2

.

4. Tur n the Rotar y knob 

&

 clockwise or

counterclockwise to set the dimmer level.
Choose the dimmer level from the following.

“OFF”,

“LEVEL 1”,

“LEVEL 2”, “LEVEL 3”,

“LEVEL 4”, “LEVEL 5”.

LEVEL 1 to LEVEL 5:

The greater the dimmer level is, the more the
illumination is reduced.

OFF:

Even if the car illumination is turned on,
reduction of the display illumination does not
occur.

5. Pressing ENT button 

2

 retur ns to the

adjustment selection display.

6. Press ADJ button 

4

 to return to the previous mode.

Entering titles

Titles up to 10 characters long can be stored in
memory and displayed for radio stations and
CDs. The numbers of titles that can be entered
for each mode are as follows.

1. Press FNC button 

3

 to select the mode you want

to enter a title. (radio, CD changer or TV)

∗

 Titles cannot be entered for MDs with this unit.

2. Select and play a CD in the CD changer or tune

to an appropriate TV or radio station.

3. Press DISP button 

!

 and display the subtitle.

4. Press TITLE button 

4

. “TITL” appears in the

display and the cursor position flashes.

5. Press the right or left side of SEARCH button

%

 to move the cursor.

6. Press DISP button 

!

 to select a character.

Each time you press DISP button 

!

, the

character changes in the following order:

Capital letters 

➜

 Small letters 

➜

 Numbers 

➜

Symbols 

➜

 Umlaut 

➜

 Capital letters...

7. Turn the Rotary knob 

&

 to select the desired

character. Tur ning the Rotar y knob 

&

clockwise moves the cursor to the next
character; turning it counterclockwise moves
the cursor to the previous character.

8. Repeat steps 5 to 7 to enter up to 10

characters for the title.

9. Press and hold ENT button 

2

 for 2 seconds

or longer to store the title into memory and
cancel title input mode.

Clearing titles

1. Play a CD in a CD changer or tune a radio

station or TV station that you want to clear
the title for.

2. Press DISP button 

!

 and display the subtitle.

3. Press TITLE button 

4

. “TITL” appears in the display

and the display switches to the title input display.

4. Press BND button 

#

.

5. Press and hold ENT button 

2

 for 2 seconds or

longer to clear the title and cancel the title input
mode.

Adjusting the display contrast

You can adjust the display contrast according to
the angle of installation of the unit.

CD changer mode

Number of titles

CDC655z connected

60 titles

CDC655Tz connected

100 titles

CDC1255z connected

50 titles

Mode

Number of titles

Radio mode

30 titles

TV mode

15 titles