Clarion RMX855Dz, Owner'S Manual

RMX855Dz

13

Radio Operations

FM reception

For enhanced FM perfor mance the

®

 tuner includes signal actuated

stereo control and Multipath noise reduction
circuits.

Changing the reception area

This unit is initially set to USA frequency intervals
of 10kHz for AM and 200kHz for FM. When using it
outside the USA, the frequency reception range
can be switched to the intervals below.

● 

Setting the reception area

1. Press BND button 

#

 and select the desired

radio band (FM or AM).

2. While pressing RDM button 

7

, each time you

press and hold the number “1” of the Preset
buttons 

9

 for 2 seconds or longer, the

reception area switches from inside the USA
to outside the USA or from outside the USA to
inside the USA.

∗

 Any station preset memories are lost when the

reception area is changed.

Listening to the radio

1. Press FNC button 

3

 and select the radio

mode.

2. Press BND button 

#

 and select the radio

band. Each time the button is pressed, the
radio reception band changes in the following
order:

FM1 

➜

 FM2 

➜

 FM3 

➜

 AM 

➜

 FM1...

3. Press the right or left side of SEARCH button

%

 to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.

Seek tuning

1. Press BND button 

#

 and select the desired

band (FM or AM).

∗

If “MANU” is lit in the display, press and hold
BND button 

#

 for 1 second or longer. “MANU”

in the display goes off and seek tuning is now
available.

2. Press the right or left side of SEARCH button

%

 to automatically seek a station.

When the right side of SEARCH button 

%

 is

pressed, the station is sought in the direction
of higher frequencies; if the left side of
SEARCH button 

%

 is pressed, the station is

sought in the direction of lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press BND button 

#

 and select the desired

band (FM or AM).

∗

If “MANU” is not lit in the display, press and
hold BND button 

#

 for 1 second or longer.

“MANU” lights in the display and manual tuning
is now available.

2. Tune into a station.

●

 Quick tuning:

Press and hold the right or left side of
SEARCH button 

%

 for 1 second or longer to

tune in a station.

●

 Step tuning:

Press the right or left side of SEARCH button

%

 to manually tune in a station.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
preset button recalls the stored radio frequency
automatically.

1. Press BND button 

#

 and select the desired

band (FM or AM).

2. Press the corresponding Preset button 

9

 to

recall the stored station.

∗

Press and hold one of the Preset buttons 

9

for 2 seconds or longer to store that station into
preset memory.

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

2. Press and hold one of Preset buttons 

9

 for 2

seconds or longer to store the current station
into preset memory.