12
7. User Selectable Programming Options
The Ungo MS2105/MS2107 features a user selectable programming table allowing
simple adjustments to match the user’s preferences.
User Programming Options Table
7.1 Programmable Options
1.
Arming Mode:
Selects whether or not the system will automatically Arm when
ignition is turned off.
2.
Auto Rearming:
Selects whether or not the security system will rearm if no activity
is detected after Remote Disarming. (If Passive Door Locking feature was selected
during installation, the system will also relock the doors.) Automatic Rearming only
takes place if the system was Armed (actively or passively) for at least 10 seconds
and then remotely disarmed.
3.
Arming Chirps:
Selects whether or not the security system will chirp when arm and
disarmed.
4.
Ignition Controlled Door Locking:
Selects whether or not the doors will lock when
the ignition is turned On. Ignition Controlled Door Locks will automatically lock the
doors 10 seconds after the ignition is turned On. To prevent the keys from being
locked inside the vehicle; the security system will not lock the doors if any of the
doors is open when the ignition is turned On.
5.
Ignition Controlled Door Unlocking:
Selects whether or not the security system
the doors will unlock when the ignition is turned Off. Ignition Controlled Door
Unlocking can be configured to unlock all the doors or driver's door only.
6.
Override Code Programming:
Selects the number of times the Valet button must
be depressed to override the system. The Override Code can be any number
between 1 and 15. (Default setting is 1)
1.
Arming Mode
Active
Passive
2.
Auto Rearm
On
Off
3.
Arming Chirps
Normal
Silent
4.
Ignition Controlled Door Locking
On
Off
5.
Ignition Controlled Door Unlocking
All Doors
Driver’s Door
Off
6.
Override Code Programming
Code Set
7.
Remote Start in Valet Mode
Enabled
Disabled
8.
Automatic Starting
Every 2 Hours
Every Hour
9.
Engine Run Time
15 minutes
25 minutes
Feature
Button 1 (default) Button 2
Button 3
MS2105 owner.qxd 8/25/2003 4:21 PM Page 12
Summary of Contents for UNGO MS2105
Page 1: ......
