background image

11

©   2 0 0 6   d i r e c t e d   e l e c t r o n i c s ,   i n c .

g

gllo

ossssa

arryy  o

off  tte

errm

mss

Control Unit:

The “brain” of your system. Usually hidden under

the dash area of the vehicle. It houses the microprocessor that
monitors your vehicle and controls all system functions.

LED:

A light mounted at a discretionary location inside the

vehicle. It is used to indicate the status of your system. 

Starter Interrupt:

An automatic switch controlled by your system

which prevents the vehicle’s starter from cranking whenever the
system is armed. The vehicle is never prevented from cranking
when the system is disarmed, in Valet Mode, or if the starter
interrupt switch itself fails. Your system has feature-ready
circuitry for the starter interrupt, however installation may
require additional labor. 

Transmitter:

A hand-held, remote control which operates the

various functions of your system. 

Valet Switch:

A small button mounted at a discretionary location

inside the vehicle. It is used to override the system when a trans-
mitter is lost or damaged, or to enter or exit Valet Mode.

Summary of Contents for UNGO PRO SECURITY K20




















Reviews: