Bluetooth Telephone Operations
54
VRX785BT
English
Owner
’s ma
nua
l
●
Setting Noise Canceller
You can reduce noise generated during hands-
free talk. This function may reduce the sound
quality.
• Select either LOW or HIGH depending on the
type of your vehicle and cellular phone.
• The factory default setting is “
LOW
”.
●
Setting Ring Tone Select
The system can ring if the cellular phone cannot
generate ring tones when the Bluetooth
connection has been established.
• The factory default setting is “
AUTO
”.
●
Setting Ring Tone Volume
You can adjust the volume of the ring tone in 10
levels.
• The factory default setting is “
5
”.
●
Setting Registration Type
You can change the distribution of maximum
number of Phone Book data can be registered to
each telephone.
• The factory default setting is “
3
”.
●
Selecting Microphone
You can select the microphone to be used.
• The factory default setting is “
Internal
”.
Note:
•
When the “
Internal
” is selected, and a call comes
in during the liquid crystal panel closed, you cannot
talk to the other party because the microphone is
on the liquid crystal panel. To talk to the other
party, open the liquid crystal panel.
•
When the “
Internal
” is selected, the [
OPEN
] button
and the [
Tilt
] key are disabled during a call.
●
Setting Microphone Gain
You can adjust the input level of the microphone
in 5 levels.
• The factory default setting is “
3
”.
Note:
•
The input level of the microphone can be affected
by its surroundings. Adjust the level when the
person on the other end of the telephone has a
reception problem.
●
Confirming Bluetooth Information and
setting Pass Key
You can confirm the various information
concerning the Bluetooth Interface features.
Registering your cellular phone
(Pairing)
You can register up to 5 cellular phones.
1. Turn on the power of the cellular phone you
wish to register.
2-1. Touch the [
LOW
] or [
HIGH
] key of the Noise
Canceller item to set the function.
[LOW]:
Suitable for a GSM cellular phone.
[HIGH]:
Suitable for a CDMA cellular phone.
2-1. Touch the [
AUTO
] or [
Internal
] key of the
Ring Tone Select item to set the function.
[AUTO]:
The system will ring only when the cellular
phone cannot generate ring tones.
[Internal]:
The system will ring regardless of the
cellular phone. Select this when no ring tone
is generated with the “
AUTO
” selected.
2-1. Touch the [
[
] or [
]
] key of the Ring Tone
Volume item to adjust the volume level.
2-1. Touch the [
C
] key to display the next screen.
2-2. Touch the [
1
], [
2
], or [
3
] key of the
Registration Type item to set the function.
[1]:
Allows 250 records for first two cellular
phones, and no record for the others.
[2]:
Allows 200 records for first cellular phone,
100 records for second and third cellular
phones, and 50 records for the others.
[3]:
Allows 100 records for each cellular phone.
2-1. Touch the [
C
] key to display the next screen.
2-2. Touch the [
External
] or [
Internal
] key of the
Microphone Select item to set the function.
2-1. Touch the [
C
] key to display the next screen.
2-2. Touch the [
[
] or [
]
] key of the Microphone
Gain item to adjust the input level.
2-1. Touch the [
C
] key to display the next screen.
2-2. Touch the [
Info
] key of the BT Info item to
display the information on the screen.
2-3. When you finish confirming the Bluetooth
information, touch the [
Back
] key to return to
the previous screen.
If you want to change the Pass Key setting
of this unit, perform the following steps.
2-4. Touch the text box of the Pass Key item to
display the Ten-Key Pad screen.
• The factory default setting is “
1234
”.
2-5. Enter your desired 4-digit PIN number, then
touch the [
ENT
] key.
280QC6827BA-VRX785BT_EN.book Page 54 Wednesday, January 23, 2008 10:57 PM
