Caller ID Operations
E
N
G
L
I
S
H
23
CALLBACK FROM CALLER ID
INFORMATION
To callback from incoming call information,
the base
T/P
switch should be set at
T
.
While reviewing the incoming call list, press
ENTER
and the
UP(
▲
)
or
DOWN (
▼
)
key
will format the number with the following
dialing variations:
7 digits without a 1 prefix:
If the area code of the Caller ID number
matches to the setting of the stored area
code, the dialed numbers can be 7
digits only.
Area Code + 7 digits without a 1 prefix:
If the area code of the Caller ID number
matches to the setting of the stored area
code, the dialed numbers can be Area Code
+ 7 digits.
10 digits without a 1 prefix:
If the area code of the Caller ID number is
different from the stored area code, the
dialed numbers can be 10 digits without
a
1
prefix.
10 digits with a 1 prefix:
If the area code of the Caller ID number is
different from the stored area code, the
dialed numbers can be
1
+ 10 digits.
When reviewing the Caller ID information,
press
ENTER
to display the phone number in
a different format.
Example 1:
Stored Long Distance Service code: 1.
Stored area code: 770.
Stored incoming call number 770-123-4567.
1. Pressing the
ENTER
key will show
blinking
123-4567
.
2. Pressing the
TALK
or
ENTER
key
again will dial out
1234567
.
OR
3. Pressing the
UP (
▲
)
key will show
blinking
770-123-4567
. Then press
the
TALK
or
ENTER
key again will
dial out
7701234567
.
OR
4. Pressing the
UP(
▲
)
key will show
blinking
1-7701234567
. Press the
TALK
or
ENTER
key will dial out
17701234567
.
OR
5. Pressing the
UP (
▲
)
key will show
blinking
123-4567
again.
PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 23
