DELUXE FUSION AUDIO SYSTEM
30
DO NOT DIVE.
55
DO NOT DIVE.
deluxe fusion audio system
Warning:
Never remain in your spa longer than 15 minutes per session when the water
temperature is above 98˚F. If you wish to spend more time in your spa, whether enjoying music,
or just lounging, be sure to keep the spa water at or below body temperature (98.6˚F).
*Please refer to your stereo Owner’s Manual for specific operations.
Optional Stereo Docking Station
Your spa is equipped with an iPod™ docking station that will allow you to listen to personal selec-
tions through the audio system of the spa. This audio system also has an FM only radio receiver
that can be used to listen to local FM broadcasts. Due to varying signal conditions the FM radio
reception may be limited.
The docking station is compatible with most iPod™ products. Master Spas, Inc. does not guarantee
compatibility with all iPod™ products due to software changes and upgrades.
The wireless remote provided with the spa is water resistant, but should never be left in the spa
when not in use.
Power On
To activate the Digital Media Locker™, press the on/off button, standby mode will be indicated by a
red LED. ON mode will be indicated by a blue LED. When the unit is in the standby position the red
LED will be lit.
Remote Synchronizing
Press and hold MODE button on the remote. The display will then show “pair”. Keep pressing this
key. Then press the power button on the locker from off(no light) to standby (red light)to pair with
the locker. If the pairing is successful it will show “welcome” and the LED on the locker will turn blue.
If pair is not successful. Please repeat the step above.
Each Digital Media Locker™ comes with a matching RF (Radio Frequency) Wireless LCD Remote con-
trol. This remote is required use any functions on the unit.For any additional remote controls, you will
need to activate/Synchronize those remote controls to the main unit by following the steps above.
The remote control uses state-of-the-art technology and will inform you if the dock is receiving the
command from the remote control. In any case,if the LCD displays “NO LINK” this means that your
Locker is off or remote control is out of reception range.
Each Digital Media Locker™ comes with a matching RF (Radio Frequency) Wireless LCD remote
control. This remote is required to use any functions on the unit. For any additional remote con-
trols you will need to activate/synchronize those remote controls to the stereo by following the
steps above.
If you lose your remote control and buy a replacement, follow the steps above to pair/synchronize
before normal usage.