background image

13

H

Regulatory/Compliance Statement 

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications.  However, there is no guarantee that interfer-

ence will not occur in a particular installation.  If this equipment does cause harmful interference to 

radio or television reception, which can be det

ermined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one of the following measures:

-  Reorient or relocate the receiving antenna.

-  Increase the separation between the equipment and receiver.

-  Connect the equipment into an outlet on a cir

cuit differ

ent from that to which the receiver is 

connected.

-  Consult the dealer or an experienced radio/TV technician for help. 

W

arning: Changes or modifications t

o this unit not expressly approved by the party responsible 

for compliance could void the user’s authority to operate the equipment.

 This transmitter must not be co-located or operating in conjunction with any other antenna or 

transmitter.

 Privacy of communications may not be ensured when using this equipment.

Summary of Contents for XLCgo




















Reviews: