Notes
Performances are of trucks with 410 lb (185 kg)
industrial battery and 200 lb (91 kg) battery pack.
Performance may vary +5% or -10% due to motor,
tire, drive unit and hydraulic efficiency tolerances
and battery weight.
Clark products and specifications are subject to
change without notice.
© Clark Material Handling Company 2005.
SepEx is a registered trademark of Curtis Controls,
Inc.
ANSI/ASME and Insurance Classification
Standard truck meets all applicable mandatory
requirements of ASME-B56.1 Safety Standard for
Powered Industrial Trucks (latest edition at time of
manufacture). Underwriters Laboratories “E” or “EE”
classifications are available as options. For further
information contact a Clark representative.
For Your Safety
• Do not operate motorized hand trucks unless
you are trained and authorized. Read and
understand the operator’s manual before
operating.
• Do not operate a damaged or faulty truck. Do
not attempt repairs unless you are trained and
authorized.
• Keep hands on designated grips and feet away
from truck. Do not operate truck with wet or
greasy hands or shoes.
• Enter confined areas with load end first. Be
very careful when operating in confined areas
to avoid being pinned.
• Avoid uneven or slippery surfaces and loose
materials.
• Travel slowly and with caution on slopes and
do not turn. Always travel with load end down
grade.
• Do not load truck over capacity on nameplate.
Do not handle unstable loads. Be very careful
when handling long, high, or wide loads.
• Do not exceed floor weight limits.
Battery Compartment Dimensions
For Battery Tray
For Industrial
(Tray Size)
Battery
in
mm
in
mm
Width
10.4
265
28.5
724
Length
7.2
185
9.0
229
Height
12.5
317
24.0
610
Connector: SB175 Red
Lead Position: B15”
Pallet Specifications
in
mm
Type:
Double Faced Wood
Size: Length
48
1220
Width (min-max)
32-48 815-1220
Bottom Board
Nominal Thickness
0.75 20
Available Fork Lengths
Nominal Length
Actual Length
in
mm
in
mm
36
914.4
35.63
905.0
42
1066.8
41.63
1057.4
48
1219.2
47.63
1209.8
WP
45
50.4 in
(1280 mm)
46.6 in
(1184 mm)
32.8 in
(833 mm)
26.25 in
(667 mm)
9.0 in
(229 mm)
Standard Fork Length
48 in (1219 mm)
9.25 in
(235 mm)
3.25 in
(83 mm)
4.6 in
(117 mm)
54.4 in
(1382 mm)
6.7 in
(170 mm)
3.25 in
(83 mm)
7.3 in
(185 mm)
30 in
(762 mm)
17.2 in
(437 mm)
69.6 in (1768 mm)
Brake off position
66.4 in
(1687 mm)
7.3 in
(185 mm)
27.0 in
(686 mm)
DIMENSIONS & GENERAL DA
T
A
WP45_598942041v5.qxd 3/21/05 15:57 Page 4
