5
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
• Leave pressure in the receiver overnight, or when transporting.
• Adjust, or tamper with the safety valves. The maximum pressure is factory
set, and clearly marked on the machine.
• Operate in wet or damp conditions. Keep the machine dry at all times.
Similarly, a clean atmosphere will ensure efficient operation. Do not use
in dusty or otherwise dirty locations.
• Touch the machine until it has cooled down...some of the metal parts
can become quite hot during operation.
• Operate your compressor with any guards removed.
FIRE PREVENTION
ALWAYS
• Switch the engine OFF when refuelling.
• Refuel away from any source of heat.
• Refuel in a well ventilated area.
DO NOT
• Overfill the tank, fill to the level specified.
• Smoke whilst refuelling and avoid smoking or using a naked flame near
the compressor.
• Start the engine if there is spilled fuel. Any spillage must be wiped clean
and the compressor allowed to dry before attempting to start the
engine.
EXHAUST GAS PRECAUTIONS
ALWAYS
• Make sure that there is adequate ventilation when using the
compressor.
• Position the compressor so that the exhaust is pointed away from people
or animals.
DO NOT
• Use the compressor indoors or in an enclosed area. (i.e. in a warehouse,
tunnel, well, hold etc.)
WARNING: EXHAUST FUMES CAN BE FATAL
Summary of Contents for 2092500
Page 16: ......
