3
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com
SAFETY PRECAUTIONS
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately - do not wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - do not let children handle the tool.
Make sure that any other persons in the work area are suitably dressed
and are wearing eye and ear protection.
4. Keep the work area well lit.
5. Although the cut off tool may be used outdoors, do not leave it exposed
to the elements. Avoid direct sunlight, direct heat, rain/moisture etc.
6. Keep the air supply hose away from sources of heat, oil and sharp edges.
7. Do not fit the tool to a stand or clamping device that may damage it.
GENERAL USE
1. Always stay alert and use common sense - do not use this product when
you are tired or under the influence of alcohol or medication.
2. Always wear eye protection when using the cut-off tool to provide
protection from flying particles from the front and the side.
3. Always wear ear protectors when using the cut-off tool .
4. Do not over-reach. Keep proper footing and balance at all times.
5. Never use any type of bottled gas as a source of power for the tool.
6. Do not connect the air supply hose with your finger on the trigger
7. Do not exceed the maximum pressure for the tool: (90 psi / 6 bar).
8. Check air hoses for leaks or worn condition before use and ensure that all
connections are secure.
9. Do not use the tool for any purpose other than that described in these
instructions.
10. Never carry out any alterations or modifications to this product.
11. Always disconnect from the air supply when:
Performing any maintenance
The tool is not in use
The tool will be left unattended
Moving to another work area
12. Never force or misuse the tool. It will do a better and safer job at the rate
for which it was designed.
Summary of Contents for 3110730
Page 16: ......
