7
OPERATING INSTRUCTIONS
WARNING!
WAIT UNTIL THE ANVIL HAS STOPPED ROTATING BEFORE OPERATING THE
DIRECTION CONTROL SWITCH.
USING THE DIRECTIONAL CONTROL BUTTON
The direction control button should be used as follows.
1
For normal tightening, the impact wrench should be operated in the forward (F)
direction.
2
For loosening, the impact wrench should be operated in the reverse(R) direction.
Direction control button in
forward position
Direction control button in
reverse position
Direction
control
button
Direction
control
button
FITTING THE IMPACT SOCKET
1
Select the impact socket you require
WARNING!
NEVER use standard sockets. These may
shatter with serious consequences. Use
ONLY Impact sockets.
2
Push the inpact socket onto the anvil
as shown.
Summary of Contents for 3110860
Page 12: ......
