3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
GENERAL SAFETY RULES
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - Do not let children handle the tool.
4. Do not operate the tool where there are flammable liquids or gases.
5. Stay alert and use common sense - do not operate this tool when you are
tired or under the influence of alcohol, drugs or medication.
6. Always wear eye protection, ear defenders and gloves when using air
tools. Safety glasses must provide protection from flying particles from the
front and the side.
7. Do not overreach - keep proper footing and balance at all times.
USE
1. Never use oxygen, carbon dioxide, combustible gasses, or any bottled gas,
as a source of power for an air tool. This product should only be used with a
suitably rated compressed air supply.
2. Do not connect the air hose with your finger on the trigger.
3. Do not fit the air tool to any stand or clamping device that may damage it.
4. Do not exceed the maximum pressure for the tool of 6.2 bar.
5. Keep the air hose away from heat, oil and sharp edges.
6. Check hoses for leaks or excessive wear before use, and ensure that all
connections are secure.
7. Do not use the tool for any other purpose than described in this manual.
8. Do not carry out any alterations or modifications to the tool.
9. Always disconnect from the air supply when:
• Performing any maintenance.
• The tool is not in use.
CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN
PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.
Summary of Contents for 3120178
Page 16: ......
