10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
BEFORE USE
IMPORTANT: The engine is supplied without any oil in it and must be filled to
the correct level before use, see below.
ENGINE OIL
1. Turn the oil filler cap anticlockwise
and remove it from the engine,
wipe the integral dipstick with a
clean cloth.
2. Insert the oil filler cap back into
place and then remove it again.
3. If the oil reads low on the dipstick,
add oil to the reservoir (Max 0.6 L).
• We recommend the use of
SAE10W-30 oil which is
available from your Clarke
dealer.
• Do not overfill the oil reservoir.
4. Replace the oil filler cap.
WARNING: PLACE THE LOG SPLITTER ON LEVEL GROUND WITH THE ENGINE
SWITCHED OFF.
WARNING: TAKE CARE NOT TO TOUCH ANY HOT PARTS OF THE ENGINE
WHEN CHECKING THE OIL LEVEL.
CAUTION: RUNNING THE ENGINE WITH INSUFFICIENT OIL WILL CAUSE
ENGINE DAMAGE.
Summary of Contents for 3402042
Page 24: ......
