12
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
BLEEDING THE HYDRAULIC SYSTEM
Before operating the log splitter, the
bleed screw should be loosened by
2-3 turns until air can go in and out of
the oil tank smoothly.
• Air flow through the bleed
screw hole should be
detectable when the log
splitter is in operation.
Before moving the log splitter, make
sure the bleed screw is tightened to
avoid oil leaking from this point.
STARTING THE ENGINE
1. Open the fuel supply valve (A) by
sliding it to the right.
2. Close the choke (B) by sliding it to
the left.
NOTE:
If the engine is already hot, it
is not necessary to close the
choke.
CAUTION: FAILURE TO DO THIS WILL CAUSE PERMANENT DAMAGE TO
THE LOG SPLITTER.
Bleed Screw
Summary of Contents for 3402042
Page 24: ......
