13
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
3. Open the throttle (C) by sliding it
to the left (rabbit symbol).
4. Turn the engine switch (D) to the
on (I) position.
5. Gently pull the recoil starter
handle until it engages, then pull it
all the way out in a rapid pull.
• This may take 5-6 pulls to start.
6. Once the engine starts, move the
choke to the 1/2 way position.
7. After 15 seconds, open the choke
fully by moving it all the way to
the right.
NOTE:
Moving the choke too fast
can kill the engine.
8. Adjust the throttle to the required
speed.
• When idling use a lower speed to save fuel, and when in use
increase the throttle to ensure maximum power.
IMPORTANT: allow the engine to warm up with no load for at least 1 minute
after each start-up.
• The log splitter is now ready for use.
Summary of Contents for 3402042
Page 24: ......
