8
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
OPERATION
CONTROL PANEL
1 = TIMER (24HR SETUP)
Press this button to set the length of time the dehumidifier runs for (1-24 Hours)
via the LCD display. To cancel the timer, press the button twice once the timer
is set.
2 = DRYING
Press this button to start the dehumidifier drying procedure. This will prevent
mold inside the dehumidifier due to damp. The whole drying procedure takes
approximately 1 hour. Press the button again to cancel the drying procedure.
3 = AIR SPEED
Use this button to adjust the fan speed (High or Low).
4 = LCD DISPLAY - DISPLAYS HUMIDITY, TIME & ERRORS
This displays the room humidity. When set in AUTO mode, this will display the set
humidity in percentage of humidity.
5 = HUMIDITY SETTING
Press this button to display and change humidity range (30% - 80%). The
humidity setting is only valid in AUTO mode.
6 = MODE
During start up or timer start up, press this button to select AUTO, CONTINUOUS
or DRYING modes. The indicator light will correspond with the mode selected.
Long press (3 seconds) the button to select child lock mode, repeat the
procedure to cancel/turn off the child lock mode.
7 = ON/OFF
Press this button to turn the dehumidifier on or off.
Summary of Contents for 6470683
Page 16: ......
