6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
operation. If damaged, have the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
6.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
SERVICE
1.
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained
STAPLER/NAILER SPECIFIC SAFETY WARNINGS
1. Always assume that the tool contains fasteners. Careless handling of the
stapler/nailer can result in unexpected firing of fasteners and personal
injury.
2. Do not point the tool towards yourself or anyone nearby. Unexpected
triggering will discharge the fastener causing an injury.
3. Do not actuate the tool unless the tool is placed firmly against the
workpiece. If the tool is not in contact with the workpiece, the fastener
may be deflected away from your target.
4. Disconnect the tool from the power source when the fastener jams in the
tool. While removing a jammed fastener, the tacker may be accidentally
activated if it is plugged in.
5. Do not use this stapler/nailer for fastening electrical cables. It is not
designed for electric cable installation and may damage the insulation of
electric cables thereby causing electric shock or fire hazards.
Summary of Contents for 6487058
Page 16: ......
