background image

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE submersible pump.

This highly efficient pump is designed for pumping clean water only, please 
see Features, page 5), and are ideally suited for draining ponds, pools, 
building excavations etc, where water temperature does not exceed 35°C.

These pumps are NOT suitable for pumping salt water, or for permanent 
installation in fish ponds as the acidity, found in fish ponds, will damage the 
pump seals.

These pumps are fitted with a thermal overload switch. If the pump overheats 
for any reason, it will automatically switch the pump OFF. Once the pump has 
cooled (at least 5-10 minutes), the pump will automatically restart.

Before attempting to operate your pump, please read this instruction manual 
thoroughly and follow all directions carefully. This is for your own safety and 
that of others around you, and to help you achieve long and trouble free 
service from your pump.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.  This guarantee does not effect your 
statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the 
obligation to deal with the WEEE in accordance with the WEEE 
regulations in relation to the treatment, recycling & recovery and 
environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws governing 
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal 
facility.

Summary of Contents for 723100













Reviews: