background image

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Bottle Jack.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

Keep these instructions for future reference.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

SPECIFICATIONS

CTBJ5

CTBJ10

CTBJ12

Rated Load

5 tonne

10 tonne

12 tonne

Min Height of saddle

220 mm

210 mm

235 mm

Max Height of saddle

495 mm

525 mm

580 mm

Pump oil capacity

475 ml

610 ml

850 ml

Dimensions (L x W x H) mm

130x135x220

175x165x210

190x180x235

Weight

7.8 kg

11.1 kg

15.15 kg

Length of Operating handle

590 mm

590 mm

590 mm

Summary of Contents for 7621037













Reviews: