6
LUBRICATE INTERNAL COMPONENTS
1. Open the release knob.
2. Pump the handle several strokes to assure proper internal lubrication.
BLEED HYDRAULIC SYSTEM
During transportation, the jack may become "air-bound" causing spongy ram
action.
TO BLEED THE HYDRAULIC SYSTEM -
1. Close the release valve by turning
release knob clockwise.
2. Remove the 4 cover screws and
lift off the cover.
3.
Remove the
transport plug.
4. Pump the handle to raise the jack
up to full height,
5. Install the air vent plug (supplied).
6. Replace the cover.
7. The jack is now ready to use.
Summary of Contents for 7621045
Page 11: ...11 DECLARATION OF CONFORMITY...
Page 12: ......