Clarke 7623075, Operation & Maintenance Instructions Manual

3

SAFETY PRECAUTIONS

GENERAL

1. ALWAYS read and ensure you fully understand the following precautions 

and the hazards associated with this product. Do not allow anyone who 
has not read these instructions to use the jack.

2. Only use this jack for its intended purpose.

3. NEVER carry out any modifications to this product. If experiencing difficulty 

of any kind consult your local dealer.

WORK AREA

1. NEVER use the jack on sloping surfaces, only on level ground. The jack may 

move away slightly as soon as it lifts the tyre from the ground.

2. DO NOT start the vehicle engine with the jack in use.

3. This jack is for lifting only. DO NOT move a load using the jack as a dolly.

4. Ensure the load is taken by the full saddle and that the point of lift on the 

load is of sufficient strength to support the full load adequately.

5. Never allow children or bystanders in the area while the jack is in use.

6. NEVER work under a vehicle supported only by this jack. If working 

underneath a vehicle. 

Always use axle stands designed for the purpose.

7. Ensure the jack is on a firm solid base and that there is no likelihood of it 

slipping, sinking or otherwise moving when under load.

8. Ensure that all personnel are well clear of a load being raised or lowered.

SERVICING & REPAIRS

1. Check the jack for damage before use and do not use if damaged. If in 

doubt, DO NOT use. Consult your local dealer.

2. ALWAYS use spare parts supplied by Clarke International. Using non-

standard parts could be extremely dangerous.

3. Ensure that the jack is properly maintained at all times and that no  

corrosion or other damage is allowed to weaken any part of it.

4. When necessary, have your jack serviced or repaired by a qualified 

technician using identical replacement parts. This will ensure that the 

WARNING: THE OPERATOR MUST FOLLOW ALL INSTRUCTIONS WITHIN THIS 
INSTRUCTION BOOKLET