7
OPERATION
HOIST CONTROL
LIFT/LOWER BUTTON
1. Push the Lift button to lift the load.
2. Push the Lower button to lower
the load.
3. To stop the hoist release the
button.
NOTE:
The load will not stop immediately when you release the lower
button. It can continue for a 3-4 mm before the brake takes
effect.
EMERGENCY STOP
Push the emergency stop to stop the hoist in an emergency.
The emergency stop can be reset by turning it clockwise until it ‘pops’ out.
TO USE YOUR HOIST
Before use, make sure that the emergency stop and the lift/lower buttons are
in good condition.
1. Play out the cable.
• Keep the cable in tension so that the coils on the drum remain
neatly in place.
2. Attach the hook to the load, the hook must be placed -
• Directly above the centre of gravity of the load, and in line with the
hoist.
• Make sure that nothing prevents a clean lift.
CAUTION: MAKE SURE THE HOIST HAS STOPPED BEFORE MOVING IN THE
OPPOSITE DIRECTION.
WARNING: LIFTING OPERATIONS MUST BE PLANNED, SUPERVISED AND
CARRIED OUT SAFELY BY COMPETENT PERSONNEL.
EMERGENCY STOP
LIFT
LOWER
Summary of Contents for 7630386
