13
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
GENERAL MAINTAINANCE
Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents.
Dirt or moisture in the jacks can affect readings.
Clean the jacks as follows:
1. Make sure that no object is clamped in the jaws.
2. Turn the meter off and remove the test leads.
3. Shake out any dirt that may be in the jacks.
4. Soak a new swab with alcohol. Work the swab around in
each jack.
GENERAL MAINTAINANCE
1.
Remove the screw from
the rear battery cover.
2. Gently pull back the
battery release clip and
remove the 3 batteries.
3. Replace the 3 batteries,
making sure that the
positive side is facing
upwards on each
battery.
NOTE:
The batteries required
are 3 x CR2032
