6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
WARNING
To avoid possible electric shock or personal injury, follow
these guidelines:
• Do not use the meter if it is damaged. Before you
use the meter, inspect the case. Pay particular
attention to the insulation surrounding the
connectors.
• Inspect the test leads for damaged insulation or
exposed metal. Check the test leads for continuity.
Replace damaged test leads before you use the
meter.
• Do not use the meter if it operates abnormally.
Protection may be impaired. When in doubt, have
the meter serviced.
• Do not operate the meter around explosive gas,
vapor, or dust.
• Do not apply more than the rated voltage, as
marked on the meter, between terminals or
between any terminal and earth ground.
• Before use, verify the meter’s operation by
measuring a known voltage.
• When servicing the meter, use only specified
replacement parts.
• Use with caution when working above 30V ac rms,
42V peak, or 60V dc. Such voltages pose a shock
hazard.
• When using the probes, keep your fingers behind
the finger guards on the probes.
• Connect the common test lead before you
connect the live test lead. When you disconnect
test leads, disconnect the live test lead first.
