7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SETTING UP AS AN EXTENSION LADDER (1)
1. To create an extension ladder, lay
the ladder on a flat surface and
extend it until the safety catches
secure the each section to the
one below.
2. If the upper section needs to be
extended further to next locking
position release the catch. The
upper section can now be
adjusted to the new position.
3. When using the ladder, ALWAYS make a visual check that ALL parts have
latched into the locked position.
SETTING UP AS AN A-FRAME STEP LADDER (2)
1. To create a step ladder engage
the two sections at the top and tilt
to create the steps.
2. When using the ladder,
ALWAYS
make a visual check that
ALL
parts have latched into the
locked position.
SETTING UP AS AN EXTENDED STEP LADDER (3)
1. When adding the third section as
an extended step ladder, slide the
top section through the locating
brackets until the required height
is achieved.
2. Lock in position with the safety
catch as in Fig 3.
3. When using the ladder,
ALWAYS
make a visual check that
ALL
parts have latched into the
locked position.
STORAGE AND TRANSPORT
When storing or transporting the ladder, engage the latch shown in Fig 3 to
hold the two ladder sections together.
Summary of Contents for ALC3-6
Page 8: ......