Clarke BARREL User Manual Download | Manualshive

Page: 3 / 24

background image

3

INSTALLATION OF THIS PRODUCT

WARNING!

AN ACCREDITED HEATING ENGINEER MUST CARRY OUT THE

INSTALLATION OF THIS STOVE. ALTERNATIVELY, SHOULD A NON-
ACCREDITED ENGINEER UNDERTAKE THE INSTALLATION, YOUR LOCAL
BUILDING CONTROL OFFICER WILL BE REQUIRED TO APPROVE THE
COMPLETED INSTALLATION UNDER BUILDING REGULATION “J”.

IT IS AN OFFENCE UNDER UK LAW, NOT TO COMPLY WITH THIS
MANDATORY REQUIREMENT.
IF THE STOVE IS NOT FITTED CORRECTLY BY AN APPROVED PERSON, IT
COULD RESULT IN A HOUSE FIRE OR CARBON MONOXIDE POISONING.

READ ALL THE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION

These instructions cover the basic principles to ensure satisfactory installa-
tion of the stove, although details may need slight modification to suit
particular site conditions. In all cases the installation must comply with
current Building Regulation ‘J’, Local Authority Bye-laws, European and
National standards and any other specifications or regulations as they
affect the installation of the stove.

The information contained in this manual includes extracts from the
Building Regulations 2000 “Approved Document J” (Combustion Appli-
ances and Fuel Storage Systems), updated October 2010. This Guidance
information in no way replaces your responsibility as an installer or end
user to comply with the appropriate standards.

SAFETY WARNINGS FOR YOUR GUIDANCE

THIS STOVE WILL BE HOT

when in operation and due care should

be taken. Thick gloves should be used to operate the primary/
secondary controls or reaching inside the stove to position fuel or
remove ash.

FIRES CAN BE DANGEROUS -

Always use a fireguard in the pres-

ence of children, the elderly or the infirm. The fireguard should be
manufactured in accordance with B.S. 6539 - Fireguards for use
with solid fuel appliances.

DO NOT OVERFIRE -

it is possible to fire the stove beyond its design

capacity. This could damage the stove, so watch for signs of
overfiring - if any part of the stove starts to glow red, the stove is
in an overfire situation and the controls should be adjusted
accordingly. Never leave the stove unattended for long periods
without first adjusting the controls to a safe setting. Careful air
supply control should be exercised at all times.

«
1
2
3
4
5
...
»

Summary of Contents for BARREL

























Reviews:

No comments

Related manuals for BARREL

Brand: Procom Pages: 25

Studio Stove 14

Brand: Warmington Pages: 16

Brand: Desa Pages: 28

DIADEMA ACS IDRO

Brand: Extraflame Pages: 36

Taurus Aqua 28/858

Brand: Konigshutte Pages: 36

CINEA Pellets Stove

Brand: ZANTIA Pages: 84

Brand: RAIS Pages: 56

Brand: Silvercrest Pages: 25

Brand: Silvercrest Pages: 118

VEGA VERENA ECO

Brand: Capital Pages: 16

Traditions Freestanding P11

Brand: Lennox Pages: 44

Brand: Monessen Hearth Pages: 28

Brand: HWAM Pages: 24

Brand: Baxi Fires Division Pages: 7

Brand: Univa Pages: 24

Brand: Drolet Pages: 64

Brand: HearthStone Pages: 32

Brand: bemodern Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands