8
ELECTRICAL CONNECTIONS
Connect the mains lead to a 230 Volt (50Hz) single phase 30 amp electrical supply,
through a suitably fused isolator with a fuse rating of 20 Amps.
DO NOT connect to a domestic system via a 13 AMP plug.
WARNING! THIS APPLIANCE MUST BE EARTHED
IMPORTANT:
The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow
-
Earth
Blue
-
Neutral
Brown
-
Live
As the colours of the flexible lead of this appliance may not correspond with the
coloured markings identifying terminals in your plug proceed as follows:
•
The wire which is coloured green and yellow must be connected to the
terminal which is marked with the letter E or by the earth Symbol ( ) or
coloured green or green and yellow.
•
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
•
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
We recommend that this machine is connected to the mains supply via a
Residual Current Device (RCD)
If in any doubt, DO NOT attempt any connections or repairs yourself. Consult a
qualified electrician, your local Clarke dealer or Clarke International on:
020 8988 7400 or e-mail Service@clarkeinternational.com
Summary of Contents for BOXER 100
Page 1: ...1 OPERATION MAINTENANCE INSTRUCTIONS BOXER100 AIRCOMPRESSOR 0109 BOXER100 AIRCOMPRESSOR ...
Page 21: ...21 PARTS DIAGRAM ...
Page 23: ...23 ...
Page 24: ......