Clarke CAT131, Operating & Maintenance Instructions

12

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

STORAGE

If the tool is to be stored, or is idle for longer than 24 hours, run a few drops of 
Clarke air line oil into the air inlet, and run the tool for 5 seconds in order to 
lubricate the internal parts.

When not in use, disconnect from air supply, clean & store in a safe, dry place.

SPECIFICATION

Please note that the details and specifications contained herein are correct 
at the time of going to print. However Clarke International reserve the right to 
change specifications at any time without prior notice.

Model Number

CAT131/CAT132

Part Number(s)

3120145 / 3120146

Min. Hose Size (ID)

3/8” BSP

Max Operating Pressure

90 psi (6.2 bar)

Air Consumption

18 cfm (max @90psi) average 6.5 cfm

Max No Load Speed

7000 rpm @ 90psi

Max Torque

680 Nm (500 ft/lb)

Air Inlet Size

1/4“BSP

Sound Pressure Level (LpA dB)

87 dB(A)

Sound Power Level (LwA dB)

98 dB(A)

Vibration Levels

4.35 m/s

2 

(uncertainty factor K= 1.5m/s

2)

Weight(s)

2.6 kg (CAT131)

4.2 kg complete (CAT132)

Wrench Dimensions (L x W x H)

210 x 190 x 90 mm