CARE AND MAINTENANCE
A build-up of moisture in the air
compressor will accelerate wear and corrosion in airline tools. Ensure
any moisture is drained from
the compressor routinely and that the inlet
filter is kept clean. Condensate is collected in the polycarbonate bowl of
the mini air filter, and will eventually become visible. This will drain
automatically when the air supply is turned off. The external stem of the
drain valve is a 5mm hose-tail, where a hose can be fitted for collecting
the water.
Never use solvents to clean the filter bowl. There are no user
serviceable parts on this product.
CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty
manufacture for a period of 12 months from the date of purchase. Please keep
your receipt as proof of purchase. This guarantee is invalid if the product is found
to have been abused or tampered with in any way, or not used for the purpose for
which it was intended. Faulty goods should be returned to their place of purchase,
no product can be returned to us without prior permission. This guarantee does not
affect your statutory rights.
PARTS & SERVICE TEL 020 8988 7400
CLARKE INTERNATIONAL, Epping, Essex CM16 4LG
CAT152 Mini Air Filter
FITTING & MAINTENANCE
INTRODUCTION
Thank you for purchasing this CLARKE Air Filter. Before attempting to
use this product, please read this manual thoroughly and follow the
instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your
purchase giving
you long and satisfactory service.
SPECIFICATION Max Pressure 90psi (6.2 bar)
Air inlet/Outlet Size ¼”BSP (female in/male out)
Air Consumption 17 cfm (8L/sec) @ max 90 psi
This in-line filter is built to operate in an environment which does not
60
o
C and the compressed air is not contaminated with solvents
to such an extent as to cause damage to polymer components.
