CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not affect your statutory rights.
Please read these instructions carefully before operating the tool
Thank you for purchasing this
CLARKE
Air Butterfly Impact Wrench
Before using the device, please read this manual thoroughly and carefully follow
all instructions given. This is for your own safety and that of others around you, and
is also to help you achieve long and trouble free service from your new tool.
- 2 -
ACCESSORIES
A wide range of Airline accessories is available, including Filter/Regulators, Lubricators, High
Pressure Hoses from 5 to 100 Metres, etc. Contact your CLARKE dealer for further information,
or CLARKE International Sales Department on 01992 565300
PARTS & SERVICE TEL: 020 8988 7400
or e-mail as follows:
PARTS: Parts@clarkeinternational.com
SERVICE: Service@clarkeinternational.com
- 5 -
PARTS DIAGRAM
PARTS LIST
Index
Part
Description
Index
Part
Description
No.
No.
Qty
No.
No.
Qty
1
KL106101
Motor Housing
1
27
KL106127
Back Cap Gasket
1
2
KL106102
Anvil Bushing
1
28
KL106128
Ball Bearing
1
3
KL106103
Oil Seal
1
29
KL106129
Rear End Plate
1
4
KL106104
Rubber Nose Guard
1
30
KL106130
Rotor
1
5
KL106105
Throttle Lever
1
32
KL106132
Rotor Blade
6
6
KL106106
Throttle Pin
2
33
KL106133
Cylinder
1
7
KL106107
Oiler Screw
1
34
KL106134
Motor Pin
1
8
KL106108
‘O’ Ring
1
35
KL106135
Front End Plate
1
9
KL106109
Back Cap
1
36
KL106136
Oil Seal
1
10
KL106110
Air Inlet Block
1
37
KL106137
Ball Bearing
1
11
KL106111
‘O’ Ring
1
38
KL106138
‘O’ Ring
1
12
KL106112
‘O’ Ring
1
39
KL106139
Snap Ring
1
15
KL106115
Regulator
1
40
KL106140
Hammer Cage
1
16
KL106116
‘O’ Ring
1
41
KL106141
Cam
1
17
KL106117
Retainer Plate
1
42
KL106142
Hammer
1
18
KL106118
Lock Washer
2
43
KL106143
Hammer-Pin
1
19
KL106119
Screw
2
44
KL106144
Anvil
1
20
Kl106120
Fixing Ring
1
45
KL106145
‘O’ Ring
1
21
KL106121
Retaining Ring
1
46
KL106146
Socket Retention Ring
1
22
KL106122
Valve Spring
2
47
KL106147
Cage Bushing
1
23
Kl106123
Valve Seat
2
48
KL106148
Lock Washer
4
24
KL106124
Valve
2
49
KL106149
Cap Screw Long
2
25
KL106125
Plunger Spring
2
50
KL106150
Cap screw Short
2
26
KL106126
Plunger
2
IMPORTANT:
T
he use of parts other than CLARKE replacement parts may result in safety hazards,
decreased tool performance and may invalidate your warranty.
