9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
CARTON CONTENTS
The following items should be supplied in the carton. If any parts are missing or
damaged, please contact the Clarke dealer where you purchased the tool.
• 1 x 1200 Watt Circular Saw.
• 1 x 185 mm Ø x 16 mm Bore x 24 Tooth TCT blade.(assembled on tool).
• 1 x Parallel Fence.
• 1 x 6 mm Hexagon Key.
ADJUSTMENTS
DEPTH OF CUT ADJUSTMENT
1. Loosen the depth adjustment
knob.
2. Adjust the base plate until the
required depth of blade is
protruding through the base
plate.
3. Tighten the depth adjustment
knob.
NOTE:
For optimum results, a full
tooth of the blade teeth
should just be visible below the workpiece.
BEVEL ADJUSTMENT
1. Loosen the bevel locking knob.
2. Adjust the base plate to the
required angle (max
45
o
)
• Use the bevel scale as a guide
only, for accurate angles use a
protractor.
3. Tighten the bevel adjustment
knob to secure.
CCS185 Circular Saw.fm Page 9 Monday, December 12, 2011 3:39 PM
