background image

TECHNICAL SPECIFICATION

Description:

Model No: ............................................................................................ CD1250
Part No: ................................................................................................ 6470622
Use: ............................................................................... Domestic/Small office

Product Specification:

Operating Voltage: .................................................................................. 230V
Motor Wattage: ....................................................................................... 420W
Operating Temperature: ................................................................ 5°C - 35°C
Max Extraction Rate: .................................................................. 16 Litres/Day
Tank Capacity: ...................................................................................... 5 Litres

Dimensions & Weights:

Product: (length x width x height) .................................. 300 x 348 x 586mm
Weight: ...................................................................... 20Kg (gross) 18Kg (nett)

- 4 -

Summary of Contents for CD1250














Reviews: