7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
BEFORE USE
FITTING THE BATTERY PACK (NOT SUPPLIED)
This impact driver requires a 20V battery pack (6487040) and 1 Hour Charger
(6487050) to operate. Both are available separately from your local Clarke
dealer.
TO FIT THE BATTERY
1. Slide the battery pack onto the
base of the impact driver.
TO REMOVE THE BATTERY
1. Press and hold the release buttons
on the side of the battery.
2. Slide the battery pack away from
the base of the handle.
FORWARD/REVERSE
The forward/reverse switch is used to
select the direction of rotation.
SAFETY LOCK OFF
The forward/reverse switch can be
used as the safety lock off button by
pushing it half way through the drill
body.
WARNING: ALWAYS LOCK THE TRIGGER SWITCH IN THE OFF POSITION
WHEN THE IMPACT DRIVER IS NOT BEING USED. THIS IS AN IMPORTANT
SAFETY FEATURE AND MUST BE OBSERVED.
Summary of Contents for CID20Li
Page 12: ......
