9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
MAINTENANCE AND SERVICING
1. Ensure all fixings remain tight to ensure the machine is in safe working
condition.
2. Avoid using solvents when cleaning plastic parts, most plastics are
susceptible to damage from the various types of commercial solvents.
Keep the unit clean by wiping with a dry cloth.
• All bearings etc, in this machine are lubricated with a sufficient
amount of high grade lubricant for the machines lifetime under
normal operating conditions, therefore no further lubrication is
required.
• Refer to your CLARKE dealer if internal maintenance is required.
• Your Clarke impact driver has been designed to give long and
trouble free service. If, however, having followed the instructions in
this booklet carefully, you encounter problems, take the unit to your
local Clarke dealer.
STORAGE
• Make sure that the machine is stored in a clean, dry place, out of
reach of children when not in use.
• Always store the machine and its charger in the case supplied.
WARNING: ALWAYS REMEMBER TO POSITION THE DIRECTION CONTROL
SWITCH IN THE CENTRAL LOCKED OFF POSITION AND REMOVE THE
BATTERY PACK, BEFORE CLEANING THE IMPACT DRIVER.
Summary of Contents for CID20Li
Page 12: ......
