Clarke CON1500RHD, Operation & Maintenance Instructions Manual

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE 6 Function Hammer Drill.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

WHAT’S SUPPLIED

Unpack your tool and make sure that the following items are present. Should 
there be any damage caused during transit contact your Clarke dealer 
immediately.

Rotary Hammer Drill

Side Handle Assembly (fitted)

1 x Pin Wrench

1 x Metal Key Chuck & Adaptor

1 x 250 mm Depth Stop Rod

1 x Dust Shield Cup

1 x 250 mm Bull Point Chisel

1 x 250 mm x 20 mm Flat Chisel

1 x 150 mm x 8 mm Drill Bit

1 x 150 mm x 10 mm Drill Bit

1 x 150 mm x 12 mm Drill Bit