10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
MAINTENANCE
• The stapler/nailer does not require any specific maintenance other
than keeping it free from any dirt or debris. This can be done using a
clean dry cloth and/or brush. Do not use solvent or alcohol based
cleaner as it could damage the casing.
• There are no user serviceable parts on the stapler/nailer. If there is a
problem please contact your nearest CLARKE dealer.
• Do not open the casing, the guarantee will be void if the casing has
been opened or if the stapler/nailer has been tampered with.
• The use of parts other than CLARKE replacement parts may result in
safely hazards, decreased tool performance and will invalidate your
warranty.
SPECIFICATION
WARNING: REMOVE THE BATTERY FROM THE STAPLER/NAILER BEFORE
CARRYING OUT ANY SERVICING OR MAINTENANCE
Input Voltage
18V DC
Max Firing Speed
20 shots/min.
Maximum Magazine Capacity
100 Nails or 100 Staples
Nail Type
18 Gauge (F-Type) 15-50mm
Staple Type
Type90 16-40 mm
Dimensions
300 x 270 x 90 mm
Weight inc battery
3.5 kg
Activation Mode
Full Sequential Actuation
Noise Characteristic Values In Accordance With EN12549.
Sound Pressure:
84.1 dB(A)
Sound Power Measured LwA
95.1 dBLwA
Vibration Characteristic Values In
Accordance With ISO 8662-1 1: 1999
2.879 m/s
2
Summary of Contents for CONSN18LI
Page 12: ......
