8
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
USING THE STAPLER/NAILER
1.
P
ay attention to the SAFETY INSTRUCTIONS on page3.
2. Hold the tool securely and press
the nose against the work as
shown.
• Always hold the stapler/nailer
square to the workpiece, never
at an angle.
3. Gently pull the trigger.
4. Release the trigger and lift the
stapler/nailer away from the
workpiece.
5. Repeat steps 2-4 as required.
6. In the event of long breaks in work
or at the end of the working shift,
remove the battery and empty
the magazine.
TIPS
• Do not intentionally activate the stapler/nailer if the magazine is
empty.
• Do not attempt to staple/nail at the edge of a workpiece, the edge
could fail, causing a nail or staple to shoot straight through.
Summary of Contents for CONSN18LI
Page 12: ......