Clarke Contractor CON1500RDV, Operation & Maintenance Instructions Manual

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Hammer Drill. The CRD1500RDV is 
designed for general drilling/masonry drilling/chiselling/drill & hammer use in 
trade and light industrial applications.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

INVENTORY

1

Blow-moulded Case

9

150 mm x 12 mm TCT Drill Bit

2

1500 Watt Rotary Hammer

10

Dust Shield Cup

3

Side Handle Assembly (fitted)

11

13 mm Keyed Chuck

4

Depth Stop Rod

12

SDS+ Chuck Adaptor (fitted to 13 
mm chuck and including L.H.T. 
retaining screw)

5

250 mm Bull Point Chisel

13

Chuck Key

6

250 mm x 20 mm Flat Chisel

14

Pin Wrench

7

150 mm x 8 mm TCT Drill Bit

15

Accessory Storage Box

8

150 mm x 10 mm TCT Drill Bit

16

Pot of Grease (for SDS+ Chuck & Bit 
Shanks)