background image

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE electric car polisher.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

IMPORTANT

Please read all of the safety and operating instructions carefully before using this 
product. Please pay particular attention to all sections of these instructions that display 
warning symbols and notices.    

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

LIST OF CONTENTS

• Car polisher

• 3 x polishing bonnets

• 2 x applicator bonnets

WARNING! This is a Warning symbol. This symbol is used 
throughout the user guide whenever there is a risk of personal 
injury. Ensure that these warnings are read and understood at all 
times.

Summary of Contents for CP254













Reviews: