Thank you for purchasing this Clarke Tile Cutting Machine.
The ETC7 tile cutter incorporates a 180mm sintered diamond cutting disk and
will make straight cuts on tiles with a maximum cutting depth of 34mm.
The table may be tilted so that tiles may be cut to any angle up to 45 degrees.
The maximum cutting depth at 45 degrees is 15mm.
Please read this manual thoroughly before use. This will ensure the safety of both
yourself and those around you, and will also ensure
long and trouble free
service from your Tile Cutter.
GUARANTEE
This product is guaranteed against faults in manufacture for 12 months from
purchase date. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product has been abused or tampered with in
any way, or not used for the purpose for which it is intended. The reason for
return must be clearly stated.
This guarantee does not affect your statutory rights.
SPECIFICATIONS
Motor ....................................................................................... 230V, 50 Hz 1ph
Power Rating .......................................................................... 400Watts
Running Current ..................................................................... 1.9Amps
Speed ...................................................................................... 2950RPM
Fuse Rating .............................................................................. 13 Amps
Table Dimensions .................................................................... 340x390mm
Weight (Net) ........................................................................... 11.5kg
Cutting Angle ......................................................................... 0 - 45 degrees
Cutting Depth at 90
O
............................................................. 34mm
Cutting Depth at 45
O
............................................................. 15mm
Cutting Disk Diameter ............................................................ 180mm
Cutting Disk Bore .................................................................... 22.2mm
Cutting Disk Part Number ...................................................... 6490640
Sound Power Level ................................................................. 104 Lw(A)
Sound Pressure Level ............................................................. 96dB(A)
Vibration .................................................................................. <2.5m/s
2
Overall Dimensions (LxWxH) ................................................. 340x426x255mm
Part Number ......... ETC7 (Chromium plated Table) ........... 3400505
ETC7SS (Stainless Steel Table) ............... 3400510
PARTS LIST AND DIAGRAM
No. Description
Part No.
1
Parallel Fence
TMCETC701
2
Clamp
TMCETC702
3
Lock Knob
TMCETC703
4
Cutting Disk Cover
TMCETC704
5
Screw
TMCETC705
6
Lock Washer
TMCETC706
7
Flat Washer
TMCETC707
8
Water Trough
TMCETC708
9
Hex. Nut M12
TMCETC709
10
Outer Flange
TMCETC710
11
Cutting Disk
TMCETC711
12
Inner Flange
TMCETC712
13
Disk Guard Support
TMCETC713
14
Washer
TMCETC714
15
Hex. Screw M4
TMCETC715
16
Cabinet
TMCETC716
17
Switch Box Cover
TMCETC717
18
Switch Assembly
TMCETC718
33
Terminal Block
TMCETC733
34
Cable Clamp
TMCETC734
35
Terminal Base
TMCETC735
36
Capacitor
TMCETC736
40
Side Cover
TMCETC740
44
Motor
TMCETC744
52
Disk Guard
TMCETC752
55
Table STC7
TMCETC755
55
Table ETC7SS
TMCETC755A
57
Lock Knob
TMCETC757
62
Power Cord
TMCETC762
64
Splash Guard
TMCETC764
No.
Description
Part No.
2
7
