3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SAFETY PRECAUTIONS
WORK AREA
1.
Keep work area clean and well lit.
Cluttered and dark areas invite
accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
1.
Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges or refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
2.
Do not expose power tools to rain or wet conditions.
Water entering a
power tool will increase the risk of electric shock.
3.
When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of
electric shock.
PERSONAL SAFETY
1.
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.
A moment of
inattention while operating power tools may result in personal injury.
2.
Use safety equipment. Always wear eye protection.
Safety equipment such
as dust mask, non-skid safety shoes, or hearing protection used for
appropriate conditions will reduce personal injuries.
3.
Avoid accidental starting. Ensure the switch is in the off position before
connecting to the power supply.
4.
Do not overreach. Keep proper footing and balance at all times.
This
enables better control of the power tool in unexpected situations.
WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL
INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/
OR SERIOUS INJURY. THE TERM “POWER TOOL” IN ALL WARNINGS LISTED
BELOW REFERS TO YOUR ELECTRIC TILE CUTTER.
Summary of Contents for ETC8
Page 12: ......
