background image

4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

 GENERAL SAFETY RULES 

WORK AREA 

1.

Keep the work area clean and well lit

. Cluttered and dark areas invite 

accidents. 

2.

Do not operate the log splitter in explosive atmospheres, such as in the 
presence of flammable liquids, gases or dust.

 The log splitter may create 

sparks which may ignite the dust or fumes. 

3.

Keep children and bystanders away while operating the log splitter.

 

Distractions can cause you to lose control. 

4. The surface must be perfectly level to prevent the machine from moving 

during operation.

PERSONAL SAFETY 

1.

Stay alert, watch what you are doing and use common sense when 
operating a log splitter. Do not use the log splitter while you are tired or 
under the influence of drugs, alcohol or medication. 

A moment of 

inattention while operating the log splitter may result in serious personal 
injury. 

2.

Use safety equipment. Always wear eye protection.

 Safety equipment such 

as non-skid safety shoes, close fitting clothing and suitable work gloves 
should always be used.

3.

Do not overreach. Keep proper footing and balance at all times. 

This 

enables better control of the log splitter in unexpected situations. 

4.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, 
clothing and gloves away from moving parts. 

Loose clothes, jewellery or 

long hair can be caught in moving parts. 

USAGE AND CARE 

1.

Do not force the log splitter.

 It will do the job better and safer at the rate for 

which it was designed.

2.

Store the log splitter out of the reach of children and do not allow persons 
unfamiliar with the log splitter or these instructions to operate the log 
splitter.

 Log splitters are dangerous in the hands of untrained users.

3.

Maintain the log splitter. Check for misalignment or binding of moving 
parts, breakage of parts and any other condition that may affect the 
operation of the log splitter. If damaged, have the log splitter repaired 
before use. 

Many accidents are caused by poorly maintained tools.

WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL 
INSTRUCTIONS LISTED BELOW MAY RESULT IN SERIOUS INJURY.

WARNING: SAVE THESE INSTRUCTIONS.

Summary of Contents for LOGBUSTER 10












Reviews: