ELECTRICAL CONNECTIONS
WARNING: THIS MACHINE MUST BE EARTHED.
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for
connection to a standard, electrical supply. Should the plug need changing at
any time, ensure that a plug of identical specification is used.IMPORTANT: The
wires in the mains lead should be wired up in accordance with the following colour
code:
Green & Yellow
—
Earth
Blue
—
Neutral
Brown
—
Live
Connect GREEN & YELLOW coloured cord to terminal marked with a letter
“E” or Earth symbol “ “.
Connect BROWN cord to terminal marked letter “L”.
Connect BLUE cord to terminal marked letter “N”.
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.
non-rewirable) please note:
1.
The plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local dealer or most
electrical stockists.
FUSE RATING
The fuse in the plug must be replaced with one of the same rating (
13 amps
) and
this replacement must be approved to BS1362.
CABLE EXTENSIONS
Use cables with a section of 2.5 mm
2
. Avoid use of free and inadequately insulated
connections. Connections must be made with protected material suitable for
outdoor use. Do not use extension cables over 10 metres long, as excessively long
cables or those with inadequate section can cause voltage drops that prevents
the motor from developing its full power.
We strongly recommend that this machine is connected to the mains supply
through a Residual Current Device (RCD).
If in doubt, consult a qualified electrician. Do not attempt any electrical repairs
yourself.
6
Summary of Contents for LOGBUSTER II
Page 10: ...10...
