6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
8. Unscrew the locking/transit bolt so
that the LOGBUSTER can slide freely.
9. Stand with feet suitably spaced for
stability and away from the line of
the splitting blade.
10. Hold the rubber grip and support
the upper handle of the LOGBUSTER
only, raise it upwards and give a
sharp downward jab to engage the
blade into the log.
11. With the blade now engaged, use
both hands on the rubber grip to
raise the upper handle of the
LOGBUSTER and stab downwards, repeat this until the log splits.
12. Depending on the type of wood, the straightness of the grain, dimensions,
moisture content etc, it may be necessary to repeat the splitting operation
several times before the split is complete.
SPECIFICATIONS
Please note that details and specifications contained herein, are correct at
the time of publishing. We reserve the right to change specifications at any
time without prior notice.
Model Number
Logbuster M
Length At Rest/Extended
818mm/1123mm
Outer Dimensions
Upper Casing: 45mm, Lower Casing: 38mm
Splitting Rod: 22mm
Splitting Wedge
Length: 200 x 40 x 40 x 0.5mm
Weight
4.55 kg
Summary of Contents for LOGBUSTER M
Page 8: ......
