18
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SPLITTER OPERATION
Before operation, attach the
machine to a level floor using M10
hold down bolts (not supplied).
1. Plan your work site.
• Work safely and save effort by
planning your work before
hand.
• Have your logs positioned
where they can be easily
reached.
• Have a site ready to stack the
split wood or load it onto a
nearby truck or other carrier.
2. Prepare the logs for splitting.
• This splitter will split logs up to
550mm in length and 300mm in
diameter.
3. Apply a thin layer of grease to the
surfaces of the ram before
operation
• This will increase the durability
of the ram.
4. Route the power cable in a way
that safeguards against tripping
on or damaging the cable, during
the work session. Protect the
power cable from impact, pulling or contact with corrosive materials.
WARNING: DO NOT TRY TO SPLIT
GREEN LOGS. DRY, SEASONED
LOGS SPLIT MUCH MORE EASILY
AND WILL NOT JAM AS
FREQUENTLY AS GREEN WOOD.
Summary of Contents for LOGBUSTER V6
Page 24: ......
